How does the PPR tube last longer? The power system is a power production and consumption system composed of power generation, transmission, substation, distribution, and consumption. It converts primary energy in nature into electricity through mechanical energy devices and then supplies electricity to various users through power transmission, transformation, and distribution. What consumers choose the most is that the pagoda joint is the safest. The water pipe can be directly inserted into the joint, and the pipe clamp can be used to ensure no water leakage. The quick-plug connector is no longer the choice of consumers because it can only use a PUR water pipe for the outer diameter of the water pipe, so consumers no longer choose such a connector.
Common quick-screw joints, common hoses on the market are also essential in water-cooled heat dissipation systems. The role of water pipes is equivalent to pipes. The water-cooling liquid is transmitted to the cold head and water tank through the water pipes. The inner diameter and outer diameter, the common sizes of water pipes are 3 pipes and 4 pipes respectively. The larger the inner diameter of the water pipe, the greater the water flow, but the size of the relative joint with the larger outer diameter of the water pipe should also be larger so that there will be no water leakage. In addition, people should pay attention to the bending degree of the water pipe. The bending of the water pipe will easily allow the water cooling liquid to pass through more happily, while the small bending degree will cause dead ends, which will affect the flow rate of the water and the overall heat dissipation effect.
In order to prolong the service life of ppr water pipes, in addition to its own quality, it is also affected by construction factors. Therefore, if you want to prolong the service life of ppr water pipes, you cannot lose to construction:
1. According to the material limitation of the PPR pipe, the compressive capacity is not higher than that of the metal pipe. Therefore, protection work should be done during construction, and it should not be squeezed by a strong external force.
2. It is strictly forbidden to expose the ppr tube to the sun and place it in a lower temperature environment. If necessary, protective measures must be taken for the ppr tube, and a protective layer can be wrapped on the outside of the tube to play a protective role.
3. Since the PPR pipe will expand and contract under certain circumstances, relevant technical methods must be used to prevent the deformation of the water pipe during construction.
4. After the water pipe is installed, it must be tested for pressure. The pressure test pressure and pressure test time must be carried out according to the technical requirements, the pressure and time values of different types of water pipes are different, and the pressure test must be carried out in strict accordance with the technical manual.
5. During the pipe laying process, according to the safety distance and technical requirements, install the holding card to fix it to ensure the safety and stability of the ppr water pipe when it is over water.
